|
|
System
Usage Instructions
ThermoForm
System
Professional Custom Trays
ThermoForm
(Boil-n-Bite) System
| 1. |
Boil
a pot of water and then submerge your bleaching tray into it for 5 to 15
seconds. You will see the tray begin to wilt. NOTE -
Keeping the trays submerged too long will cause it to shrink.
|
|
2.
|
Shake
off the excess water to prevent burning yourself and place
the tray into your mouth. Press it against the front of your teeth with
your fingers and the back of your teeth with your tongue. Let it cool and
your tray is now perfectly molded to your teeth. NOTE - You will only need
to conduct the Thermoforming (Boil-n-Bite) procedure once for each tray,
not each time you conduct your whitening session.
|
|
3.
|
Squeeze
a small amount of whitening gel into the front of your tray. You don't need to over-fill it.
|
|
4.
|
Place
tray over your teeth for 1-3 hours. Repeat this process for both
upper and lower teeth once per day until teeth have reached desired shade
of white.
|
Professional
Custom Tray System
|
1.
|
Clean
and dry hands before beginning. Remove one catalyst paste
and one base paste and mix the two together by rolling and
kneading in your hand for approximately 45 seconds until well
blended into one color. The material will begin to harden
if mixed for more than 1 minute.
|
|
2.
|
Roll
out the material the width of the tray. Press the material
and shape into the tray.
|
|
3.
|
Take
the loaded tray and place over the upper teeth. Teeth
should be centered in the impression material. Press
firmly and with your fingers so you can feel the material flow
over your teeth and gums. Do not bite down!
Just hold in place with your fingers. The impression
material will extrude through the holes on the tray. Keep
the impression in place for one minute, and then remove and
rinse in cold water. The total amount of time to make your
impressions is only 1 minute each.
|
|
4.
|
Repeat
the above steps for your lower teeth.
|
|
5.
|
Please
do not remove impressions from trays! Just place them in
the self-addressed, postage paid envelope to our lab.
Custom fit trays will be received within 7-10 days.
|
|
6.
|
Squeeze
a small amount of whitening gel into the front of your tray. You
do not need to
over fill it.
|
|
7.
|
Place
tray over your teeth for 1-3 hours. Repeat this process
for both upper and lower teeth once per day until teeth have
reached desired shade of white.
|
2005 BriteTooth.com ALL RIGHTS RESERVED |
|
|
